Sun Microsystems StorageTek SL500 User Manual Download Page 248

Page: 248 / 436

Partition Design and Commit Screens

216

SL500 User’s Guide • July 2008

Revision: KA • 96116

Note –

This procedure verifies only one partition at a time. If you need to verify

multiple partitions, you must repeat this procedure separately for each partition.

Note –

This verification is performed on the current partition configuration in the

SL Console partition workspace only. It does not verify current partition boundaries

against the library controller database; therefore it cannot identify configuration

conflicts that may arise due to other users performing cartridge movements or library

configuration changes—through the command line interface, other SL Console sessions,

or host applications—at the same time you have made partition changes.

Refresh

Click to refresh the SL Console partition workspace with current data from the

library controller database. All uncommitted partition changes you have made

during this SL Console login session will be discarded. The

Partition Refresh

popup

appears, prompting you to confirm the refresh.

? (Help)

Click to display online help for the screen.

Summary of Contents for StorageTek SL500





















































































































































































































































































































































































































































Search results

Summary of Contents for StorageTek SL500

Reviews:

Sun Microsystems StorageTek SL500, User Manual, Page: 248 / 436

Search results

Summary of Contents for StorageTek SL500

Reviews: