Sun Microsystems StorageTek SL500 User Manual Download Page 199

Page: 199 / 436

Partition Configuration Tasks

96116 • Revision: KA

Chapter 6 Library Partitioning

167

▼

Commit Partition Configuration Changes

Caution –

This procedure updates the library controller database with all partition

configuration changes you have made during this SL Console session. Failure to use

this procedure before logging out of the current SL Console session will cause all your

library configuration changes to be lost.

Caution –

For the following reasons, it is recommended that you make the library

unavailable to other users before committing your partition workspace changes.

There is no real-time validation of partition boundaries against the library controller

database; therefore if you do not make the library unavailable and other users are

performing cartridge movements or library configuration changes, configuration

conflicts may arise. See

“Synchronizing the Display With the Controller Database” on

page 31

for details.

The library temporarily drops all connections to HSC or ACSLS hosts when partition

configurations changes are committed. The hosts will automatically reconnect, but

multiple error messages will be displayed, and cartridge management tasks in progress

may fail.

Note –

It is recommended that you follow the

Resolve Orphaned Cartridges

procedure

before performing this procedure.

1. Vary the library offline to ACSLS and HSC.

See the appropriate tape management software documentation for the procedures and

commands.

2. Select Tools > Partitions, and click the Commit (Step 4) tab.

The

Commit (Step 4)

screen appears.

3. In the Options Bar, click Apply.

The boundaries of the selected partition are verified, including the locations of all tape

cartridges.

Summary of Contents for StorageTek SL500





















































































































































































































































































































































































































































Search results

Summary of Contents for StorageTek SL500

Reviews:

Related manuals for StorageTek SL500

Brands by name

Popular brands

Sun Microsystems StorageTek SL500, User Manual

Search results

Summary of Contents for StorageTek SL500

Reviews:

Related manuals for StorageTek SL500

Brands by name

Popular brands