Sun Microsystems StorageTek SL500 User Manual Download Page 204

Page: 204 / 436

Partition Management Tasks

172

SL500 User’s Guide • July 2008

Revision: KA • 96116

▼

Delete a Partition

Use this procedure to delete a partition from the library. The following changes are

made to the library partition configuration:

■

All resources allocated to the partition are marked available.

■

All host connections for the partition are deleted.

■

The partition ID is deleted.

Caution –

Deleting partitions can result in orphaned cartridges and data that could be

lost. See

“Orphaned Cartridges in Partitioned Libraries” on page 152

for details.

Note –

Deleting all partitions from the library causes the library state to change to

“non-partitioned.” All storage cells, drives, and CAPs will be accessible to all hosts.

1. Select Tools > Partitions, and click the Summary (Step 2) tab.

The

Summary (Step 2)

screen appears.

2. In the Partition Summary section, click the partition you want to remove.

3. Click Delete Partition.

A confirmation popup appears.

4. Click OK to confirm the deletion.

Summary of Contents for StorageTek SL500





















































































































































































































































































































































































































































Search results

Summary of Contents for StorageTek SL500

Reviews:

Sun Microsystems StorageTek SL500, User Manual, Page: 204 / 436

Search results

Summary of Contents for StorageTek SL500

Reviews: