Sun Microsystems Solaris 7 11/99, Hardware Platform Manual

Page: 208 / 224

196 Solaris 7 11/99 Sun Hardware Platform Guide • November 1999
Note – Perform this step only for those domains in which you want to use the
AnswerBook files.
The
pkgadd
(1M) command may display several messages and ask several
installation questions for each package, some relating to space, others asking
whether it is OK to continue. After answering these questions, and when asked
whether to proceed, answer Yes.
6. In the
netcon(1M)
window, unmount the CD.
7. Log in to the SSP as superuser and remove the Sun Computer Systems
Supplement CD from the CD-ROM drive.
8. Install and configure any other purchased software packages.
You are done upgrading the Sun Computer Systems supplements packages. You can
now configure the Network Time Protocol (NTP) packages, as described in the
following section.
▼
To Configure the NTP Packages
Perform the following steps to configure the
ntp.conf
file, which resides at
/etc/inet/ntp.conf
.
1. Log in to the domain as superuser.
domain_name
# cd /
domain_name
# umount /cdrom
ssp# cd /
ssp# unshare /cdrom/cdrom0
ssp# eject cdrom