Sun Microsystems Netscape Enterprise Server Administrator'S Manual Download Page 253

Page: 253 / 532

Chapter 10, Configuring the Server for Performance

253

File Cache in Enterprise Server 4.0

Example

File Cache Tuning

MaxFiles, SmallFileSpace, and MediumFileSpace

Size the cache appropriately for the content being served, using parameters
such as

MaxFiles

SmallFileSpace

, and

MediumFileSpace

MaxCachedFileSize

(optional) Maximum size of a file that can be
cached. Files larger than this size are not cached.

The default is 525K.

In Enterprise Server 4.0, this parameter is ignored.
Use the

MediumFileSizeLimit

parameter in

nsfc.conf

instead.

In Enterprise Server 4.0, this parameter is ignored
because it no longers applies to the platform.

MaxTotalCachedFileSize

(optional) Total size of all files in the cache.
Default is 10K, minimum is 1K, maximum is 16M.

In Enterprise Server 4.0, this parameter is ignored
on Unix. Use the

MediumFileSpace

parameter

nsfc.conf

instead.

In Enterprise Server 4.0, this parameter is ignored
because it no longers applies to the platform.

MaxNumberOfOpenCachedFiles

(optional) Maximum number of cached files that

can be open simultaneously.

CacheHashSize

(optional) size of hash table for the file cache
accelerator. Default is 8192K, minimum is 32K,
max is 32K.

NoOverflow

(optional) IRIX only.

IsGlobal

(optional) IRIX only.

Init fn=cache-init cache-size=16000 mmap-max=10000

Summary of Contents for Netscape Enterprise Server





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for Netscape Enterprise Server

Reviews:

Related manuals for Netscape Enterprise Server

Brands by name

Popular brands

Sun Microsystems Netscape Enterprise Server, Administrator'S Manual

Search results

Summary of Contents for Netscape Enterprise Server

Reviews:

Related manuals for Netscape Enterprise Server

Brands by name

Popular brands