Sun Microsystems Netscape Enterprise Server Administrator'S Manual Download Page 321

Page: 321 / 532

Chapter 13, Managing Server Content

321

Setting Up Hardware Virtual Servers for ISPs

Click Apply in the top right portion of the Server Manager to apply your
changes.

To remove a server instance, perform the following steps:

Click Remove on the line for the server instance you want to remove.

Click OK in the confirmation dialog box.

Click Apply in the top right portion of the Server Manager to apply your
changes.

The ISP-hardware virtual servers are listed in the

virtual.conf

configuration

file. This file lists the IP addresses you entered through the Server Manager and
the document root to which they apply.

You can return to using the default hardware virtual server function, by
performing the following steps:

From the Server Manager, choose Content Management tab.

Click Hardware Virtual Servers.

The Hardware Virtual Servers Page appears.

Click No to deactivate the ISP-version hardware virtual server function.

Click OK.

Click Save and Apply.

Migrating Hardware Virtual Server
Configuration Files

If you run multiple IP addresses using the

obj.conf

file, you may have

restrictions using virtual servers. For better reliability, you can migrate from the

obj.conf

file to the

virtual.conf

file by running the following script:

server_root/bin/https/httpadmin/bin/vserverupgrd -r server_root -p

administration_port -i https-server-id

Summary of Contents for Netscape Enterprise Server





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for Netscape Enterprise Server

Reviews:

Related manuals for Netscape Enterprise Server

Brands by name

Popular brands

Sun Microsystems Netscape Enterprise Server, Administrator'S Manual

Search results

Summary of Contents for Netscape Enterprise Server

Reviews:

Related manuals for Netscape Enterprise Server

Brands by name

Popular brands