Sun Microsystems Netscape Enterprise Server, Administrator'S Manual

Page: 154 / 532

Modifying Cluster Information
154 Netscape Enterprise Server Administrator’s Guide
server identifier and hostnames are the same, the form shows the port
number. If you don’t want all of the servers in the cluster, you can remove
individual servers.
For more information, see “The Add Remote Servers to Cluster Database Page,”
in the online help.
Modifying Cluster Information
If you change an Enterprise Administration Server’s host name, port number, or
protocol used (HTTP or HTTPS), you also need to modify the information
about that Enterprise Administration Server that is stored in the cluster.
To modify information about a server in a cluster, perform the following steps:
1.
Go to the master Enterprise Administration Server and choose the Cluster
Mgmt tab.
2.
Click the Modify Server link.
All servers appear listed by their unique server identifier.
3.
Check the servers you want to modify:
1.
You can change the information for all servers in the cluster by clicking
Select All.
2.
Click Reset Selection to unselect any servers you have chosen in the
form.
4.
Choose the Enterprise Administration Server protocol that the remote
Enterprise Administration Server server uses, if it has changed.
5.
If applicable, type the new hostname for the remote Enterprise
Administration Server.
6.
If applicable, type the new port number that the remote Enterprise
Administration Server uses.
7.
Click OK.