Sun Microsystems Netscape Enterprise Server Administrator'S Manual Download Page 292

Page: 292 / 532

Server-Side JavaScript Programs

292

Netscape Enterprise Server Administrator’s Guide

You can also run the Application Manager by loading the following URL in
Navigator:

http://server.domain/appmgr

Enterprise Server displays the following page:

Figure 11.1The Application Manager

The Application Manager displays all applications currently installed on the
server in a scrolling list in the left frame.

Select an application by clicking its name in the scrolling list.

For the selected application, the right frame displays the following
information:

•

The application name at the top of the frame.

•

The path of the application

.web

file on the server. (The

.web

file is

the compiled JavaScript application.)

•

The default and initial pages for the application.

•

The number of built-in database connections allowed.

Summary of Contents for Netscape Enterprise Server





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for Netscape Enterprise Server

Reviews:

Related manuals for Netscape Enterprise Server

Brands by name

Popular brands

Sun Microsystems Netscape Enterprise Server, Administrator'S Manual

Search results

Summary of Contents for Netscape Enterprise Server

Reviews:

Related manuals for Netscape Enterprise Server

Brands by name

Popular brands