Sun Microsystems Fire X4540, Administration Manual

Page: 41 / 154

27
C H A P T E R
4
Disk Administration and
Management
This chapter includes information about the following topics:
■
“Hard Disk Drive Locations” on page 27
■
“Disk Drive Status and LEDs” on page 29
■
“EFI Disk Label Overview” on page 30
■
“Converting EFI Label to SMI (Solaris) Label On The Sun Fire X4500 Disk” on
page 31
■
“Adding Disks” on page 34
■
“Replacing a Device in a ZFS Storage Pool” on page 37
■
“Removing a Disk From Service” on page 37
■
“Correcting Unconfigure Operation Failure” on page 38
Hard Disk Drive Locations
The Sun Fire X4500 server can contain up to 48 SATA hard disk drives. The hard
disk drive locations are numbered sequentially from 0 to 47, starting at the front left
corner and incrementing left to right and front to rear see
FIGURE 4-1
. The
nomenclature for the locations is DISK n , where n is the location number.