Sun Microsystems Fire X4540 Administration Manual Download Page 139

Page: 139 / 154

125

Glossary

alternate master

controller unit

Also called “alternate master unit,” the secondary array unit in an HA
configuration that provides failover capability from the master controller unit.

array

A high-performance, modular, scalable storage device.

attachment point

A collective term for a drive and its card cage slot. A

physical

attachment point

describes the software driver and location of the card cage slot. A

logical

attachment point is an abbreviated name created by the system to see the
physical attachment point.

buffering

Data that is being transferred between the host and the drives.

cfgadm

command

The primary command for dynamic reconfiguration on the Sun Fire X4540
Server. For information about the command and its options, see the

cfgadm

(1M),

cfgadm_sbd

(1M), and

cfgadm_pci

(1M) man pages.

Summary of Contents for Fire X4540



























































































































































Search results

Summary of Contents for Fire X4540

Reviews:

Related manuals for Fire X4540

Brands by name

Popular brands

Sun Microsystems Fire X4540, Administration Manual

Search results

Summary of Contents for Fire X4540

Reviews:

Related manuals for Fire X4540

Brands by name

Popular brands