Sun Microsystems Fire X4540 Administration Manual Download Page 106

Page: 106 / 154

Sun Fire X4500/ X4540 Servers Administration Guide • October 2008

Drive Conditions

A drive can be in one of three conditions: unknown, ok, or failed. A drive slot might
be designated as unusable.

Component States

A disk drive cannot be individually connected or disconnected. Thus, all such
components are in the

connected

state.

The connected component is either configured or unconfigured.

TABLE 10-3

Drive and Drive Slot Conditions

Name

Description

unknown

The drive has not been tested.

The drive is operational.

failed

The drive failed testing.

unusable

The drive slot is unusable.

TABLE 10-4

Connected Components: Configured or Unconfigured

Name

Description

configured

The component is available for use by the Solaris OS.

unconfigured

The component is not available for use by the Solaris OS.

Summary of Contents for Fire X4540



























































































































































Search results

Summary of Contents for Fire X4540

Reviews:

Related manuals for Fire X4540

Brands by name

Popular brands

Sun Microsystems Fire X4540, Administration Manual

Search results

Summary of Contents for Fire X4540

Reviews:

Related manuals for Fire X4540

Brands by name

Popular brands