Sumitomo TYPE-71c, Manual To Operation

Page: 82 / 94

5-2
2 heat shrink ovens are equipped with the TYPE-71C. These ovens run individually and
splicing operation can be improved more effectively.
*
* Two ovens can be operated at the same time.
The advancement of the heating cycle
can be confirmed on the screen. The
icon changes as the heating cycle
advances.
(Refer to the page 2-20)
Universal clamp
TYPE-71C can clamp both a tight buffer and a loose buffer coating by the standard
issue. Please change the position of the coating clamp lid as following procedures
according to the kind of the coating.
Coating clamp fixation screw
1. Loosen the coating clamp fixation
screw, and detach the coating clamp.
Coating clamp
180°
Forth
Back
Dual heat shrink oven
Heat cycle status indicator
2. The lid can be moved back and forth by
opening the coating clamp lid by 180°. Change
the position of the lid according to the coating of
the fiber, and the shut the lid.
>>Tight buffer : back
>>Loose buffer : forth
*Please prepare the loose buffer fiber as below.
φ 0.9mm
coating
φ 0.25mm
coating
Bare fiber
10mm 10mm
3. Fix the coating clamp back to the splicer.
Front
Rear
MENU
SM G652 Std.
60mm 0.25
Start
Ready
X/Y
DISP