Sumitomo TYPE-71c, Manual To Operation

Page: 21 / 94

1-6
Keypad
Caution
Do not press the keys on the keypad with a sharp object ( e.g. a ballpoint pen,
screwdriver, or nail ) Doing so will damage the keypad.
2
1
HEAT key / LED
Starts/cancels the heating cycle of
the front heat shrink oven. LED
illuminates during the heat cycle.
Power key / LED
Used to turn on and off the splicer.
LED illuminates while the splicer
is on.
HEAT key / LED
Starts/cancels the heating cycle o
ｆ
the rear heat shrink oven. LED
illuminates during heating and
blinks during cooling.
RESET key
Used to cancel a splicing
operation. Initialization
SET key
Starts a splicing operation.
1
2
The keys above are mounted on the upper surface of the splicer. The features of SET,
RESET and HEAT keys are also operated by the touch screen on the monitor.
Select switch (on the Input/output panel)
Use this switch when the touch screen on the monitor breaks down.
* Once select switch is used as the following, splice program is fixed to "auto mode"
as long as the touch screen is out of order. We recommend contacting our service
center soon when the touch screen function does not work.
[Procedure]
1) If you found the touch screen function does not work, please turn the power OFF once.
2) Turn the power ON with "select switch" being pushed.
3) “Heater program setting” screen will be indicated (refer to page 4-2). You can select
heater program with HEAT keys (up/down), and determine with SET key. Splice program
is set as “auto mode” automatically.