Sumitomo TYPE-71c, Manual To Operation

Page: 30 / 94

2-5
・ The battery pack can be charged while the splicer is operating.
However, it takes a long time compared with the time when the splicer is
stopping operating. (It takes about 14 hours.)
･
Please charge the battery in the following temperature span. The battery
pack might be deteriorated (decrease in capacity) at the temperature
that exceeds this range.
*Temperature span for charging
：
0
℃～
+40
℃
CAUTION
Insert the battery pack
LED (green)
Connect the
AC adaptor
Battery charging
1. Insert the battery pack into the TYPE-71C.
2. Connect the AC adapter with the TYPE-71C.
3. LED (green) on the side of the DC input terminal blinks, and the charge
begins.
4. It takes 2 - 3 hour to finish charging though it changes according to the
residual quantity of the battery. LED (green) lights when the charge
ends.