Sumitomo TYPE-71c, Manual To Operation

Page: 47 / 94

2-22
Applicable cable
Required items
Preparation
Factory default Fiber coating clamp is removed.
AP-FC6M
(Groove for drop cable is not available.)
AP-FC6SA
(Groove for drop cable is available.)
Groove for drop cable
Remove the single fiber adapter.
▪ Tight buffer type single fiber drop cable.
▪ Fusion splicer (TYPE-71C)
▪ Allen key 1.5 (included in fusion splicer kit)
▪ Cross-recessed screwdriver
▪ Nippers
▪ Jacket remover
▪ Fiber cleaver
▪ Fiber holders for drop cable
<Fusion splicer>
▪ Using the Allen key, remove the fiber coating clamp from the splicer.
<Fiber cleaver>
▪ If the single fiber adapter AP-FC6M is attached to the cleaver, it must be removed.
▪ If the single fiber adapter AP-FC6SA is attached to the cleaver, it does not need to be
removed and can be used as it is.
Drop cable splicing