Cyclo® HBB
6
Operation & Maintenance Manual
Cyclo® HBB
Storing and Transporting
Storage Location
• Store the unit in a clean, dry area.
•
Do not
store outdoors or in an area with high humidity, dust,
sudden temperature changes, or corrosive gases
Storage Period
•
Do not
store the unit for longer than 6 months without
obtaining long-term storage procedures from Sumitomo
• Consult Sumitomo when storing the unit for more than 6
months Rustproofing procedures are required
• Consult Sumitomo when exporting the unit. Rustproofing
procedures may be required
Operation After Storage
Before operating the unit after an extended storage period,
ensure that non-metal parts, i e , oil seals, o-rings, air breather,
have not deteriorated Non-metal parts may deteriorate easily
from exposure to ambient conditions (i e , extreme temperatures,
UV rays) Replace deteriorated parts with new ones before unit
start-up
After starting the unit, verify that there is no abnormal noise,
vibration, and/or temperature rise Immediately stop the unit and
call Sumitomo or your distributor if you observe any abnormality
Transporting
•
Do not
stand directly under a unit suspended by a
lifting mechanism Injury or death may occur if the
unit is dropped
•
Before lifting the unit
, determine its weight (refer
to catalog, packing list, etc.) and ensure that the
moving equipment will support the unit’s weight
Never hoist or move a unit that exceeds the
moving equipment’s rated capacity
or else
personnel injury and/or equipment damage may
occur
•
Do not
allow the unit to drop or fall while moving
Always use the eye bolts
attached to the gear
housing (and on motor if supplied) when moving
the unit After securing the unit to the machine,
remove the moving hooks/straps from the eyebolts.
Summary of Contents for Cyclo HBB
Page 1: ...0 7 6 0 1 6 0 0 0 3 H B B O M2 0 1 8...
Page 27: ...MA X MI N...
