38
Operation & Maintenance Manual
Cyclo® HBB
Cyclo® HBB
5
Place the
gland cover
into the screw conveyor adapter and secure it in place with
the supplied hardware
6
Carefully slide the screw conveyor adapter over the shaft and position it against the
corresponding threaded holes in the Cyclo® HBB housing Use the included hardware
to secure the adapter to the housing
7
Carefully insert the application-appropriate sealing material into the bore of the
screw conveyor adapter
• To seal the output portion of the
screw conveyor adapter
, Sumitomo Drive
Technologies provides two different options for each screw conveyor kit:
− High-Performance Braided Cord: recommended for use if the conveyed
material is abrasive
− Double-Lip, Nitrile Oil Seal: recommended for use if conveyed material is
a nonabrasive liquid
• Sumitomo
does not
recommend the use of both sealing options at the same
8
Carefully slide the
cover plate
over the screw conveyor shaft and place it against the
screw conveyor adapter Secure the cover plate using the supplied hardware
Cyclo® HBB Screw Conveyor Option
Assembly Instructions
Summary of Contents for Cyclo HBB
Page 1: ...0 7 6 0 1 6 0 0 0 3 H B B O M2 0 1 8...
Page 27: ...MA X MI N...
