![background image](http://html.mh-extra.com/html/sumec/powerg-pg18chd/powerg-pg18chd_manual_1390548018.webp)
Maintenance charge
If you leave the battery pack in the charger to prevent spontaneous discharging after
full charge, the charger will switch into its “trickle charge (maintenance charge)”
mode and keep the battery pack fresh and fully charged.
Tips for maintaining maximum battery life
1) Charge the battery pack before completely discharged. Always stop tool
operation and charge the battery pack when you notice reduced tool power.
2) Never recharge a fully charged battery pack. Over charging shortens the
battery service life.
3) Charge the battery pack with room temperature at 10
0
C-40
0
C (50
0
F-104
0
F) let
a hot battery pack cool down before charging it.
4) Charge the Nickel-cadmium battery pack when you do not use it for more than
six months.
Do not dispose of electrical appliances with your domestic waste!
1)
The packaging comprises exclusively environmentally-friendly
material. Dispose of it in your local recycling containers.
2)
Take the battery to your nearest authorized service center or
distributor that has been designated as a battery recycling location.
Summary of Contents for PowerG PG18CHD
Page 2: ...A B C ...
Page 22: ...Cordless Hammer Drill PG18CHD ...