The battery is supplied partially charged. Completely charge the battery before using
your power tool for the first time. The battery can be charged at any time without
reducing its service life. Interrupting the charging procedure does not damage the
battery.
a) Always switch off the tool before inserting or removing the battery pack.
b) To insert the battery pack (8), press the release button (7) on the battery pack
and then slide the tool forward along the upper part of battery pack. Insert it until
it locks in place with a click. If not, it may become detached from the tool,
causing injury. To remove the battery pack (8), press the battery release button
(7) and seperate the battery pack (8)
from the tool.
c) Do not use force when inserting the battery pack. If the pack does not slide in
easily, it has not been inserted correctly.
Changing Screwdriver or Drill Bits
CAUTION:
Always be sure that the tool is switched off and the battery pack is removed
before carrying out any work on the tool.
1) Hold the ring and turn the sleeve on the chuck clockwise to open the chuck
jaws. Place the bit in the chuck as far as it will go.
2) Hold the ring firmly and turn the sleeve counter clockwise to tighten the
chuck(1).
3) To remove the bit, hold the ring and turn the sleeve counter-clockwise.
Operation
Starting Operation
Switching on:
To start the appliance, squeeze on the Power switch (3).
Fitting and removing the battery pack
WARNING
Do not continue to press the Power switch after the machine has been
automatically switched off.
The battery can be damaged.
Summary of Contents for PowerG PG18CHD
Page 2: ...A B C ...
Page 22: ...Cordless Hammer Drill PG18CHD ...