XT
-
VISION
D
OSE MODULATION
-
R
ECOMMENDATION CARD
E2.1
N
AME
:
T
RAINING DEPARTMENT
D
ATE
:
04/2018
P
AGE
:
98/109
REFERENCE:
TECHNICIAN’S
OPERATING
MANUAL
POLYVRAC
XT
VISION
I
ND
02
A/ Pre-requisites
The Vision II console enables you to follow a dose modulation card. It must have GPS positioning information (Garmin
antenna, guide bars). The GPS equipment must be connected to the top port at the rear of the console and requires
configuration (performed on start-up).
The Vision II console is compatible with the modulation files saved in
RDS format
with
GPS WGS 84 projection
. They may
be generated from the Farmstar expert portal, or by the following applications: , Bgrid, Farmworks, SMS, etc.
Caution, when creating the file (depending on the software packages)
do not use any accents or symbols in the names of
farms, plots, fertiliser, etc.
The file name must
respect the following case
:
Do not modify the file name after it is created.
B/ Saving the modulation file to the SD card
(to be done on the PC)
1/ Have an SD card with a maximum capacity of
2 GB
2/ Create a folder named
RDS_DATA.XXX
at the SD card's root
3/ Copy the modulation files inside the RDS_DATA.XXX folder
Be careful with files downloaded in .zip mode; remember to "extract files".
The modulation files must be saved directly in RDS_DATA.XXX (no sub-
folders)
C/ Reading the card on the Vision II console
1/ Insert the card into the Vision console
2/ Go to the
"INFO"
menu
3/ Press
00010001.f01
task No.
(here No. 1)
field No.
(here No. 1)
farm No.
(here No. 1
"f" for
fertilisatio
n
Summary of Contents for Polyvrac XT 100 VISION
Page 1: ......
