7
8
Mounting of Open Area Track.
Align the track end to the end of the
door pocket track.
Pull out the Pocket trigger from the
door pocket track, and insert it into the
open area track.
The edge which has three
countersunk holes is the end
to be connected.
Fasten the Open area track and Pocket trigger with provided screws in order of to .
Move rollers if they cover the fastening holes on the track.
1
5
【
1
】
Connecting to door pocket track.
【
2
】
Fastening trigger and track
Remove any dirt or aluminum
chips from the track.
Overlap the two countersunk holes on
the pocket trigger and the two holes on
the open area track.
Deviation of the joint position makes
insertion of the trigger difficult.
When sliding the
pocket trigger, use a
screwdriver.
The screwdriver may unexpectedly come
out and damage the track.
After fixing the track, move rollers and check if there's any misalignment
or gap between the tracks.
OK
When tightening the
❶
screws
make sure that the both tracks are
aligned.
Screw 5 × 40
(included in
①
)
Screw 5 × 40
(included in
①
)
Screw 4 × 40
(included in
④
)
Screw 4 × 40
(included in
⑤
)
Be careful not to misalign the
tracks. Tighten the screws firmly.
1
2
3
5
4
Caution
Caution
Caution
Caution
Caution
Caution
①
Open area track
①
Door pocket track
⑤
Pocket trigger