10
Appendix 1
【
1
】
How to remove door
Put a 10 mm support under the door on the leading edge.
Remove holder
Pull out the Hanger bolt at leading edge from the Bracket.
Pull out the door,
while making sure not to let it scratch
against the door pocket.
Pull out the Hanger bolt on the trailing edge from the bracket
then pull out the door from the hanger bolt.
How to Remove Door, Track
1
2
3
4
Be careful not to let the door fall.
【
2
】
How to remove Upper track
Remove the pocket trigger screws.
Slide the Pocket trigger into the Door pocket track.
Remove the Open area-track.
The trigger can be deformed if the open area track is
removed
if the pocket trigger has not been
moved into the pocket track.
Hold the Open area track when removing the last screw.
1
2
3
3
1
Holder
Bracket
2
Hanger bolt
(Leading edge)
Hanger blot
5
3
Bottom guide
Support of 10 mm thickness
1
(Trailing edge)
4
Bracket
5
Hanger bolt
When sliding the pocket trigger, use a
screwdriver etc.
Take care not to damage the track
when sliding the pocket trigger.
Scratches on the running track may
cause a roller noise during operation.
2
3
Caution
Caution
Caution