3
The example shows the sliding door when the leading edge (at the
fully opened position) is aligned with the connecting position of the
upper tracks. To shift the connecting position towards the trailing
edge, see page 11.
10
11
Available opening length : RoW
DW
−
52
Door width: DW=RoW+DN+10
〈
In case of No Margin (DN = 0) : RoW+20
〉
Connecting position of Upper tracks
Front face of door pocket
Leading edge at fully opened position
Trailing edge at
fully closed position
DW
−
DN
When the door pocket track is longer than the door width. (Lp > DW)
(Door stoppers are needed to stop the door.)
【
Recommended
】
Door pocket track length (Lp) = Door width (DW)
(The end of door pocket stops the door.)
Margin
: DN
⑩⑪
are needed when the
door does not reach the
end of the door pocket.
:LGWKRIGRRUSRFNHW5S: 5:í5R:í'1
1
4
8
7
2
6
5
1
30
7UDFNOHQJWKGRRUSRFNHW/S 5:í5R:
Track length (opened area): Lo
= Available opening length : RoW
10
44
:LGWKRIGRRUSRFNHW5S: 5:í5R:í'1
Opening width: RW
Door width: DW=RoW+DN+10
〈
In case of No Margin (DN = 0) : RoW+20
〉
80
25
80
25
Front face of door pocket
272
473
30
30
16
15
10
17
28
40
38
17
15
2 x C5
(Min.)
20
±
4
Door
Margin : DN
Connecting position
of Upper tracks
Trailing edge at
fully
closed position
Leading edge at
fully opened position
Full opened position
Connecting position
of Upper tracks
Trigger of Leading
edge side
Trigger of Trailing edge side
Overlap : 10
〈
In case of No Margin (DN = 0) : 20
〉
Closed position
In case of No Margin (DN = 0),the front part of the
door pocket must be detachable for door hanging.
Door thickness Dt = Min. 30
Min. 7
Min. 7
Min. Opening width
of door pocket
= Door thickness : Dt + 14
4
4
Door process dimension
Vertical
adjustment range
Trailing
edge
Leading
edge
Track length (opened area): Lo
7UDFNOHQJWKGRRUSRFNHW/S 5:í5R:
INSTALLATION DRAWING (EXAMPLE)