OPERATING MANUAL FOR SELECT EDI 60
L300180 Iss:A
10
5
ABOUT YOUR WATER PURIFIER
The SUEZ Select edi 60 purifies potable water. The water is purified by a
combination of processing including; activated carbon, double pass reverse
osmosis, membrane degassing and electro-deionisation.
The Purified water produced by the unit complies with the latest standards for
laboratory grade water. Refer to Section 11.2 Treated Water Specification
for details.
5.1
The Select edi 60 range
The Select edi 60 is only as one model producing a makeup flowrate of 10
litres/hour.
The above output is based on a typical 8 hour working day at 60psi (4 bar)
inlet pressure, 25
o
C and maximum of 400 ppm total dissolved solids.
Note: At water temperatures below 25
o
C the output will decrease by as
much as 3% per Degree C. Refer to Section 11.1 for more details.
The Select edi 60 is supplied with an integral 20 litre tank or if larger
storage is required additional 50 and 100 litre tanks are available. Contact
SUEZ sales department for details.
The unit type is detailed on its serial plate which can be found on the
reverse side of the front cover.
The Select edi 60 is provided with an installation kit for quick installation.
The unit is also supplied with one complete set of consumables. Refer to
Section 9 for details
5.2
Key components of the Select edi 60
5.2.1
Touch screen display
Operation of the Select edi 60 is controlled solely through the touch
screen display. System schematics are displayed for easy
understanding of the unit’s process.
5.2.2
Storage tank
The integral storage tank holds 20 litres of purified water. To dispense
water a bib tap has been provided at the front of the tank.