Suburban Dynaline 3 A&E Manual 12/2016 Rev.1
23
OPTIONAL DRAIN
KITS
Prior to installing the wall sleeve, condensate drainage from the wall sleeve
must be considered. Two methods to drain condensate may be used:
Free Drain
A generally acceptable alternative where condensate drains from the
wall sleeve through three exterior drain holes and drops to open ground.
The chassis’ condensate evaporation system is designed to vaporize
normal condensate, and evaporate it through the warm condenser coil.
Drain Kit
A condensate drain
kit is recommended
for positive drainage
when specified or
code requires, or
when condensate
is heavy under
conditions of
extreme humidity
for extended periods
of time. We offer
drain kit #K/04943
(See Figure 22)
.
The condensate
can be freely drained
to ground level or
routed in tubing to
another location for
disposal. The drain tube kit is designed for 1/2 O.D. copper tubing.
It is field installed.
THREE EXTERIOR GRILLE STYLES OFFER
AESTHETIC OPTIONS
Three styles of exterior grilles are available to complement
building aesthetics:
Aluminum Grille
Unpainted grille of stamped, clear anodized aluminum. Protects the
outdoor fan, coil and vent cap assembly. Designed for optional rear gas
hook-up. Available in bulk UPS package (20 per package).
Aluminum Grille (optional)
Bronze-finished, architectural style grille of one-piece extruded, anodized
aluminum. Designed for optional rear gas hook-up.
Aluminum Grille (optional)
Aluminum-finished, architectural style grille of one-piece extruded,
anodized aluminum. Designed for optional rear gas hook-up.
To install grille:
Secure grille to the wall sleeve from the inside with the grille angled
downward.
(See Figure 23.)
Design limits “see through.” Do not attempt
to bend or alter the grille, venting system or vent cap assembly.
All outdoor grilles must be installed prior to installing chassis.
NOTE: Consult with factory engineers before using any other outdoor grilles
or special exterior treatment. Application of non-Suburban products could
severely affect the overall operating characteristics of the flue unit, causing
hazardous or unsatisfactory performance.
Architectural
style grille
Standard
grille
Figure 22
Summary of Contents for DYNALINE DL3-0712
Page 16: ...Suburban Dynaline 3 A E Manual 12 2016 Rev 1 16 Figure 12...
Page 26: ...Suburban Dynaline 3 A E Manual 12 2016 Rev 1 26 Figure 26 Ladder Diagram 208 230 V A C...
Page 27: ...Suburban Dynaline 3 A E Manual 12 2016 Rev 1 27 Figure 27 Schematic 277 V A C...
Page 28: ...Suburban Dynaline 3 A E Manual 12 2016 Rev 1 28 Figure 28 Ladder Diagram 277 V A C...
