Suburban DYNALINE DL3-0712, Architects And Engineers' Manual

Page: 37 / 40

Suburban Dynaline 3 A&E Manual 12/2016 Rev.1
37
SUBURBAN WILL NOT BE RESPONSIBLE FOR:
1. Normal maintenance as outlined in the owner’s installation, operating and service instructions manual
including cleaning of component parts; such as, orifices and burners.
2. Failure to start and/or operate due to voltage or gas conditions, blown fuses, open circuit breakers, loose or
disconnected wires, low gas pressure or other damages due to inadequacy or interruption or electrical service
or gas supply.
3. Damage or repairs required as a consequence of faulty or incorrect installation not in conformance
with Suburban instructions.
4. Damage as a result of floods, winds, lightning, accidents, corrosive atmosphere or other conditions
beyond the control of Suburban.
5. Costs incurred in gaining access to the furnace.
6. Parts or accessories not supplied by Suburban.
7. Damage or repairs needed as a consequence of any misapplication, abuse, unreasonable use,
unauthorized alteration, improper service, improper operation or failure to provide reasonable and
necessary maintenance.
8. Freight charges incurred from parts replacements.
9. Fuel or electricity costs or increases in such costs from any reason whatsoever.
10. Suburban products whose serial number has been altered, defaced or removed.
11. Suburban products installed or warranty claims originating outside the Continental U.S.A., Alaska,
Hawaii and Canada.
12. ANY SPECIAL, INDIRECT OR CONSEQUENTIAL PROPERTY, ECONOMIC OR COMMERCIAL DAMAGE OF
ANY NATURE WHATSOEVER. Some states do not allow the exclusion of incidental or consequential damages,
so the above limitation may not apply to you.
NO REPRESENTATIVE, DEALER OR OTHER PERSON IS AUTHORIZED TO ASSUME FOR SUBURBAN
MANUFACTURING COMPANY ANY ADDITIONAL, DIFFERENT OR OTHER LIABILITY IN CONNECTION
WITH THE SALE OF THIS SUBURBAN PRODUCT.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
IF YOU HAVE A PRODUCT PROBLEM
FIRST:
Contact the installer of the equipment or the selling dealer for warranty service. You may find his name on the
product or with your homeowners manual. If his name is not known, call your builder or general contractor if
yours is a new structure.
SECOND:
Contact the Suburban distributor who supplied the product to the installer/dealer.
THIRD:
Contact: Suburban Applied Products
Customer Service Department
156 Seedling Dr.
Cordele, GA 31015
(229) 273-3636
Fax: (229) 273-5154
www.suburbanmanufacturing.com