STUDIO DUE 0102, Manual

Page: 10 / 16

Control
Spot
Studio Due R
CHANNEL 8/10 CHANNEL 7/9 CHANNEL 4 CHANNEL 3 CHANNEL 2 CHANNEL 1
STAND BY
PROGRAM
FADING
AUTO
MUSIC
MANUAL STEPS
STEP TIME FADING
7 8 9
4 5 6
1 2 3
0
SPOT MORE ALL NONE
TILT PAN COPY CLEAR COPY DELETE INSERT
SELECT SPOTS SPOTS SPOTS
INVERT INVERT PROGRAM PROGRAM STEP STEP STEP
ENTER EXIT
PROGRAMMING
SPOTS FUNCTIONS
PROGRAMS SPOTS STEPS
SELECT
PLAY
Control
Spot
Studio Due R
CHANNEL 8/10 CHANNEL 7/9 CHANNEL 4 CHANNEL 3 CHANNEL 2 CHANNEL 1
STAND BY
PROGRAM
FADING
AUTO
MUSIC
MANUAL STEPS
STEP TIME FADING
7 8 9
4 5 6
1 2 3
0
SPOT MORE ALL NONE
TILT PAN COPY CLEAR COPY DELETE INSERT
SELECT SPOTS SPOTS SPOTS
INVERT INVERT PROGRAM PROGRAM STEP STEP STEP
ENTER EXIT
PROGRAMMING
SPOTS FUNCTIONS
PROGRAMS SPOTS STEPS
SELECT
PLAY
Control
Spot
Studio Due
R
CHANNEL 8/10 CHANNEL 7/9 CHANNEL 4 CHANNEL 3 CHANNEL 2 CHANNEL 1
STAND BY
PROGRAM
FADING
AUTO
MUSIC
MANUAL STEPS
STEP TIME FADING
7 8 9
4 5 6
1 2 3
0
SPOT MORE ALL NONE
TILT PAN COPY CLEAR COPY DELETE INSERT
SELECT SPOTS SPOTS SPOTS
INVERT INVERT PROGRAM PROGRAM STEP STEP STEP
ENTER EXIT
PROGRAMMING
SPOTS FUNCTIONS
PROGRAMS SPOTS STEPS
SELECT
PLAY
OUT IN
DMX repeater
amplifier
L
N
L
N
... 9 ...
DMX TERMINAL LINE
The wrong connection of the terminal line or its non-connection are probably the most frequent reasons for the defective functioning
of the DMX line. The terminator is a resistor fitted between the two “data” lines (pins 2 and 3 of DMX connector) at the end of the cable
furthest from the transmitter. The terminator resistor should have the same value as the impedance of the connection cable.
We suggest a termination resistor of 100 Ohms.
It is recommanded that all DMX 512 systems have the termination resistor at the and of the line.
WARNING !
DMX CONTROLLER OR LIGHT CONSOLE
EXAMPLE 1
Connection controller-spot with
1 DMX 512 OUTPUT
LAST SPOT SPOT
pict. A
SPOT SPOT
DMX CONTROLLER OR LIGHT CONSOLE
DMX1 output
DMX2 output
EXAMPLE 2
Connection controller-spot with
2 or more DMX 512 OUTPUT
TERMINATION RESISTOR
(see pict. A)
SPOT SPOT SPOT LAST SPOT
TERMINATION RESISTOR
(see pict. A)
SPOT SPOT SPOT LAST SPOT
TERMINATION RESISTOR
(see pict. A)
LAST SPOT SPOT
DMX CONTROLLER OR LIGHT CONSOLE
DMX1 output
EXAMPLE 3
Connection controller-spot to
1 DMX 512 OUTPUT over 150mts long
LINE > 150mts (with microphonic or audio cable)
SIGNAL
AMPLIFIER
DMX1 output
TERMINATION RESISTOR
(see pict. A)
100 ohm