37
Programming and installation manual Careline Anna / Careline GSM
Doc. no. 32-022-03-01 EN v6
>LED indicators<
In this menu you can set the
>Level<
of the LEDs on the top of the carephone. This applies to both the
LEDS in the red alarm button and the LEDs that signal the status on the carephone. Here under
>Alarm
button light<
you can also set the alarm button LEDs to be activated or not.
GSM functions
Has a submenu for the SIM card settings.
>Activation< >Power save<
>APN<
and
>Security<
Under
>Activation<
you can choose to deactivate the internal GSM module in the carephone. No calls can
then be called or received via GSM. As default, the function is activated.
When
>Power save<
is activated,
the GSM module is turned off during mains failure, and is only activated
during alarms. If the power save mode is activated, it is therefore not possible to use the transmitter answer
function on calls via GSM during mains failure.
NB!
If the power save mode is
activated and the
transmitter answer function is activated for the GSM connection, the battery backup time during mains
failure will decrease significantly.
Under
>APN<
you can state the network you want to use for the internet.
For
>Security<
there is a submenu that controls the security of the SIM Card. By using a SIM card with PIN
code, you minimise the risk that someone else can use your SIM card in their mobile telephone.
>SIM Lock<
controls if you use a SIM card with PIN in Careline GSM. Can be set as
<Activated>
or
<Not
activated>
. Under
<PIN code>
you can enter the PIN code for the SIM card.
Advanced
Has a submenu for the advanced settings. This menu is blocked with a code.
TT version
When you connect the hand terminal to the carephone, you can read to see the software version of Careline
Anna/GSM.
Menu version
You can read the version of the menus in the hand terminal.
