12
Operating Instructions: DME04
Decommissioning the Mixer
If the mixer is to be out of service for more than a month, e.g. for commercial
reasons, it must be stored in a frost-free and dry room. All necessary measures
must be taken before, during and after decommissioning as described
hereafter.
Prior to decommissioning
-
Thoroughly clean the mixer
-
Check for wear and damage on the chassis and any components
Final De-commissioning, Disposal
Final de-commissioning or disposal of the mixer must be performed in
accordance with the regulations of the country of use. In particular,
regulations governing the disposal of batteries, fuels and electronic and
electrical systems must be observed.
The mixer must only be disassembled by trained personnel.
Safety Tests to be performed at Intervals and after Unusual Incidents
Perform a safety check in accordance with national regulations.
The mixer must be inspected at least annually or after any unusual event by a
qualified inspector. The inspector shall assess the condition of the mixer from
purely a safety viewpoint, without regard to operational or economic
circumstances.
For further help contact the Bespoke Handling Equipment:
Technical Support Line: 44 (0) 1736 851050
In the interest of all concerned it is essential that equipment of our
manufacture is used only for the purposes for which it has been designed and
it must be used in accordance with the instructions which are supplied.
