9
Operating Instructions: DME04
Troubleshooting
When trying to locate a fault, proceed in the order shown in the table.
NOTE
:
Troubleshooting must only be performed by competent personnel. If after
carrying out the following remedial action the unit cannot be restored to
operation, contact the manufacturer’s technical helpline listed at the end of
this manual.
In order for STS to be able to react quickly and specifically to the fault, the
follow information is essential:
-
Mixer serial number
-
Description of error
-
Mixer product name
-
Current location / Company
Mixer does not rotate
Possible Cause
Action
Emergency stop engaged
Ensure emergency stop is in the
correct position (twist clockwise to
release)
Doors are not closed
Close the doors at the front of the
unit
Doors do not hold fully closed
Ensure the magnetic strips and
contact plates are clean
Isolator switch (11) is not engaged
Turn the isolator switch to the On
position
