Stryker RF MultiGen 0406-900-000 Instructions For Use Manual Download Page 37

Page: 37 / 57

www.stryker.com

0406-900-702 Rev-E

Instructions (continued)

To Change System Settings: Registration

From the Home screen, touch the SYSTEM SETTINGS button to modify
system and procedure default setting values (see figure 36).

REGISTRATION

DATE & TIME

DISPLAY

SOUND

PROCEDURE

DEFAULTS

LANGUAGE

FACTORY

DEFAULTS

EDIT

REGISTRATION

Stryker Interventional Spine

RF Generator

Hardware Revision: x.x

Serial Number: LES-xxxx

Software Revision: x.x.x.x

Service Information:

Stryker Customer Service

800-253-3210; 269-323-7700

4100 East Milham Avenue

Kalamazoo, MI 49001

Manufactured by

Synergetics USA Inc.

Registered To:

Figure 36 System Settings Screen [REGISTRATION]

EDIT Button/Registered To: Window

Touch to access a keyboard screen to enter or edit the registration
information. The window displays the registration information.

Information Window

Displays generator information related to software, hardware, and
service.

FACTORY DEFAULTS Button

Touch to remove all user-created files and folders in the file
management system and reset the generator system defaults to
the original factory default setting values.

REGISTRATION Button

Touch to access the Registration screen.

DISPLAY Button

Touch to access the Display Settings screen.

SOUND Button

Touch to access the Sound Settings screen.

DATE & TIME Button

Touch to access the Date and Time screen.

LANGUAGE Button

Touch to access the Language Settings screen.

PROCEDURE DEFAULTS Button

Touch to access the Procedure Defaults screen.

D
E
F

Summary of Contents for RF MultiGen 0406-900-000


























































Search results

Summary of Contents for RF MultiGen 0406-900-000

Reviews:

Related manuals for RF MultiGen 0406-900-000

Brands by name

Popular brands

Stryker RF MultiGen 0406-900-000, Instructions For Use Manual

Search results

Summary of Contents for RF MultiGen 0406-900-000

Reviews:

Related manuals for RF MultiGen 0406-900-000

Brands by name

Popular brands