Stryker 0702-001-000, Instructions For Use Manual, Page: 13 / 42

12 www.stryker.com
EN 0702-002-700 Rev-S
Features
Control Panel (Figure 7)
E F G H
D
C
B
A
O N M L
I
K
J
Figure 7 Control Panel
A Evacuate Smoke Button – Push the button to start or stop
smoke evacuation. See the Smoke Evacuator Modes of
Operation table for options.
B Evacuate Smoke Indicator – Illuminates when smoke
evacuator is activated.
C 4L (4-liter) Suction Limit Setting Dial – Turn the dial to
adjust the suction limit of the 4-liter canister. The suction
value will be indicated on the control panel display as a
limit SETTING value or an ACTUAL value. See the
Features
,
Control Panel Display Screens section and the Definitions ,
Suction Limit Setting Dial Colors
table.
D Suction Limit Setting Ranges – See the Definitions, Suction
Limit Setting Dial Colors table section for codes and suction
limit range information before adjusting the SUCTION LIMIT
SETTING dials.
E Control Panel Display Push Buttons (four) – Push the
appropriate button to interact with the display.
F
Control Panel Display – Provides suction values for each
canister, system status and error code messages; also
displays wash cycle options during the docking procedure.
Display brightness and contrast may also be adjusted. See the
To Adjust the Rover Settings
section.
G HIGH VACUUM / HIGH FLOW Continuous Surgical Suction
Range: 50 to 480 mm-Hg –
See the
Specifications
section.
H System Setup Button – Push and hold the button until the
SYSTEM SETUP screen appears with options.
I IV Pole Buttons – Push and hold the UP or DOWN arrow
button to raise or lower the height of the IV pole, respectively.
J System Setup Symbol – Push and hold the push button next
to this symbol to access the SYSTEM SETUP screen and
change rover settings. See the
To Adjust the Rover Settings
section.
K 20L (20-liter) Suction Limit Setting Dial – Turn the dial to
adjust the suction limit of the 20-liter canister. The suction
value will be indicated on the control panel display as a
limit SETTING value or an ACTUAL value. See the
Features ,
Control Panel Display Screens section and the Definitions ,
Suction Limit Setting Dial Color section.
L Empty 4L Canister Button – Push the button to transfer
the contents of the 4-liter canister into the 20-liter canister.
Transfer requires confirmation.
M Suction ON/OFF Button – Push the button to start or stop
fluid suction.
N Suction ON/OFF Indicator – Illuminates when fluid suction is
activated.
O Reset Volume Button – Push the button to reset the fluid
display level of both canisters to zero values. Reset requires
confirmation.
0000016914, Rev. S Effective Date: Mar 11, 2016 9:46:10 AM
Printed Date: Feb 24, 2020 18:26:59 GMT