4
PART 1 • English
1.
4 digits display:
Indicates current time in STAND-BY mode*
Indicates current channel number in OPERATING mode*
2.
usb:
Connector for USB devices.
3.
IR sensor:
Point your remote control towards this sensor.
4.
mode indicator:
REd
indicates that the receiver is in STAND-BY mode.
gREEn
indicates that the receiver is in OPERATING mode.
*Only SRT 8105
2.3 Rear Panel
Fig. 2
1.
AnT In
To connect to your antenna for the reception of broadcast signal.
2.
To Tv
To connect to the terrestrial antenna input of your TV set.
This connection will allow you to watch analogue terrestrial
programmes via the tuner in your TV.
3.
s/PdIf Coaxial
To connect your receiver to a digital audio amplifier.
4.
hdmI
To connect your receiver with your TV set using a HDMI cable.
5.
Tv sCART
To connect your receiver with your TV set using a SCART cable.*
6.
video Connector
To connect your receiver with your TV set using a cinch cable.*
7.
Audio l/R Connector
To connect your receiver with your TV set using a cinch cable.*
8.
Power Cord
Your receiver requires a voltage of 220~240V AC (Auto-
selectable), 50/60Hz ±5%. Check the local power specification
before connecting your receiver to the wall outlet.
*Only SRT 8105
2.4 Remote Control
Fig. 3
1.
q
Turns the receiver On/Standby
2.
!
Mutes audio output of the receiver
3.
Pg+/Pg
Page up/down and 10 channels steps in channel list mode
4.
dTv/vCR
No function
5.
Info
Shows the actual channel information
6.
vol+/vol
Volume up/down
7.
mEnu
Opens the main menu, In menu you will get one step back
8.
EXIT
Exits from the menu or sub-menu
9.
pq
Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
10.
tu
Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specific Menus
11.
ok
Menu Off: Displays the current channel list
Menu On: Activates the highlighted menu item.
12.
RECoRd
Records the TV programme to the connected storage device
13.
TImEshIfT
Activates the time shift function
14.
0~9
Channel selection or value input
15.
EPg
Shows the EPG (Electronic Programme Guide) in TV mode
16.
RECAll
Back to previous shown channel
