11
PART 1 • English
En
gl
is
h
Rename
Press
gREEn
in Edit Channel to enable the Rename function. The Rename sign will move up to
indicate that Rename is selected. Use
pq
to highlight the desired channel and press
ok
to select it.
A text field will now pop up at the right of the screen. Use
tu
pq
to select the desired characters
and enter them with
ok
. Once you have finished editing, press
bluE
to enter the changes. Once all
changes are made, press
EXIT
twice. Select Yes to save the changes or No to discard.
delete
Press
bluE
in Edit Channel to enable the Delete function. The Delete sign will move up to indicate
that Delete is selected. Use
pq
to highlight the desired channel and press
ok
to mark it for deletion.
The receiver asks you to enter the pin code. Once you have marked all channels you wish to delete,
press
EXIT
twice. A confirmation banner will be displayed. Select Yes to delete the marked channels
or No to cancel.
7.1.2 Radio Channel list
Basically, the operation of the Radio Channel List is the same as in the TV Channel List. The only
difference is that in Radio Channel List there is no video information, so it will always display the radio
logo at the right preview screen.
7.1.3 delete all
Use this menu to delete all stored channels. Select Delete All with
pq
and press
ok
. The receiver
asks you to enter the pin code.
(default pin:0000)
. In the confirmation window select Yes with
tu
and press
ok
to delete or select No to cancel.
WARnIng!
The Delete all function will permanently delete all current channels and all
favourite lists from your receiver, and you are not able to leave the menu until
you search for channels again.
7.2 Installation
7.2.1 Auto scan
Use
pq
to select Installation and press
ok
or
u
to advance.
Select Auto Scan with
pq
and press
ok
to enter.
Use
tu
to toggle between FTA Only Yes or No. When FTA Only is set to Yes, scrambled channels
won’t be stored in the channel list. Use
pq
to highlight Search. Now press
ok
to start auto scan.
The receiver will store all newly found channels in the channel list.
7.2.2 Channel scan
Use
pq
to select Installation, press
ok
or
u
to advance.
Use
pq
to select Channel Scan and press
ok
to enter.
Use
tu
to toggle between available scan modes: By Channel and By Frequency.
If By Channel is selected, use the cursor buttons to select Scan Band and Channel No. If By Frequency
is selected, use the cursor buttons to select Frequency and Bandwidth. Highlight Search and press
ok
to start scanning. Newly found channels will be stored in the channel list.
