15
PART 1 • English
En
gl
is
h
7.4.2 load factory setting
This option allows you to reset the receiver to factory settings, which clears all stored channels.
WARnIng!
By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. Please use this option with care.
Use
pq
to select "Load Factory Setting" in the Tools menu and press
ok
. You are asked to
input password.
Input the correct password using the
0~9 buttons
(default: 0000). A confirmation window
is displayed.
Select Yes to return to factory settings. Select No to cancel.
Press
EXIT
to leave.
7.4.3 s/W upgrade by oTA
This receiver is equipped with an Over The Air software upgrade option. An Over The Air update
might not be available in your region. Please visit our website www.strong.tv or contact your local
service hotline for more information about this option.
7.4.4 upgrade by usb
This feature allows you to upgrade your receiver’s software via the USB port. If new software is
available for your receiver, it can be downloaded from our website www.strong.tv.Place the software
file (unzipped) in the root directory of your USB storage device (HDD, memory stick etc.) and insert
this device into the USB port of the receiver.
Select Upgrade by USB from the Tools menu and press
ok
to proceed.
The upgrade menu will now be displayed.
Use
pq
to select Upgrade Mode and choose option Allcode.
Use
pq
to select Upgrade File and choose the file containing the new software.
Once all settings are made, move the highlight to Start and press
ok
to start the upgrade process.
After a few seconds, the receiver asks: “Are you sure to burn flash?”. Select Yes to finalize the upgrade
or No to quit without upgrading.
WARnIng!
After an update the receiver restarts automatically. During the upgrade
process NEVER disconnect the receiver from the mains or switch off the
power! Doing so might damage your receiver and will void warranty!
7.4.5 Remove usb device safely
Select Remove USB device safely from the tools menu and press
ok
. The receiver will display a
message indicating that you can safely remove your storage device from the receiver.
noTE:
After performing this function, the USB device is no longer accessible from
your receiver. To gain access to your storage device again, re insert it or switch
the receiver to standby and on again.
