13
PART 1 • English
En
gl
is
h
Aspect Mode:
Use this option to select the aspect ratio of your TV and the preferred
conversion method. Options are: Auto (automatic detection of aspect ratio),
4:3 Panscan (Displays 16:9 widescreen broadcasts full screen on your 4:3 TV),
4:3 letterbox (black bars on top and under the picture on a 4:3 TV) and 16:9
(use this setting for 16:9 TV sets).
Connection:
Use this option to select the connection to your TV set. Select HDMI or TV
SCART.
Digital Audio Output: Toggles between PCM and Bitstream output. When PCM is selected, all audio
will be converted to stereo audio. Bitstream enables multi-channel audio on
the digital output.
7.3.3 local Time setting
Here you can set up your region and time zone.
Region:
Use
tu
to select the region you live in.
GMT Usage:
Set to On for broadcaster defined time or to Off to input time and
date manually.
GMT Offset:
Allows you to adjust the time zone you live in. This option is only available
when GMT Usage is set to On.
The GMT Offset range is "-11:30 ~ +12:00", increasing by half hours
progressively. The cities matching the set GMT Offset are displayed at the
bottom of the screen.
Summer Time:
Select Off or On to add one hour extra for summer time during the summer.
Date:
Date and Time settings are available only when GMT Usage is set to Off. Use
the
0~9
buttons to enter the date. Press
EXIT
to proceed.
Time:
Date and Time settings are available only when GMT Usage is set to Off. Use
the
0~9
buttons to enter the time. Press
EXIT
to proceed.
7.3.4 Timer setting
This menu allows you to set up to 8 timed events for recording or waking up the receiver.
Use
pq
to select Timer Setting from the System Setup menu and press
ok
to enter.
The receiver will display a list with 8 timers, followed by their respective status. Select the timer you
wish to set or change with
pq
and press
ok
to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Mode:
Choose between Off (Timer inactive), Once or Daily (Timer will be executed
every day).
Timer Service:
Choose between Channel (Timer will wake up the receiver) or Record (Timer
will start to record the scheduled event).
Wakeup Channel:
Use
tu
to select the channel the timer will wake up with.
Wakeup Date:
Use the
0~9
buttons to input the date for the timed event.
Wakeup Time:
Use the
0~9
buttons to input the desired start time.
Duration:
Use the
0~9
buttons to input the timer duration.
Once all settings are according to your wishes, use
pq
to move the highlight to Save and press
ok
to confirm. To quit the timer without saving your settings, move the highlight to Cancel.
