12
PART 1 • English
7.2.3 Antenna Adjustment
Use
pq
to select Installation, press
ok
or
u
to advance.
Use
pq
to select Aerial Adjustment and press
ok
to enter.
Use
pq
move the highlight to the setting you wish to alter and use
tu
to change values.
The following settings are available:
Antenna Power:
Set to On if you use an active antenna. When set to On, 5 V will be present on
the ANT IN connector of the receiver. Select Off for passive antennas.
Beeper:
Select On for an audible indication of signal reception. Off turns the
beeper off.
Channel No.:
Select a channel that is known to carry a broadcast in your region. The Signal
Strength and Signal Quality bars give a visual indication of the reception.
Adjust your antenna to obtain maximum signal strength and quality.
Press
EXIT
to leave the Antenna Adjustment screen.
7.2.4 lCn (logical Channel numbering)
If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the operator,
channels will be stored in an operator defined order. Set LCN to On to activate operator defined
channel numbering or Off to store channels in found order.
7.3 system setup
This menu allows you to manage the system settings of your receiver. It consists of the following sub-
menus: Language, TV System, Local Time Setting, Timer Setting, Parental Lock, OSD Setting, Favourite
and Auto Standby.
Press
pq
to highlight desired menu and press
ok
advance to the next screen. Use
pq
to move
the highlight to the desired setting. Values can be changed with
tu
. Press
EXIT
to leave.
7.3.1 language
This menu allows you to set up your language preferences.
Language:
Use
tu
to select the desired language for the On Screen Display.
First Audio:
Use
tu
to select the desired Audio language.
Second Audio:
Use
tu
to select a language that will be played when the language selected
at First Audio isn’t available.
Subtitle Language:
Use
tu
to select the preferred subtitle language.
Subtitles:
Use
tu
to select the preferred subtitle type to be displayed automatically.
Teletext:
Use
tu
to select the preferred teletext language (when available.)
7.3.2 Tv system
Use this menu to match your receiver to your TV set. The following settings are available:
Video Resolution:
Toggles between 576i up to 1080p. Please use a setting that matches your
TV’s specifications. After a selection is made, you will be asked to confirm.
noTE:
Selection is only applicable on HDMI.
