L
INE
S
TOWS
28. Lock the bag closed with two bights of
suspension line through the elastic safety
stow. Make the bight between 1.25 and 1.5
inches in length beyond the elastics.
29. Rotate the bag onto its ears so that it is
upside down and open the pouch on the bot-
tom of the bag. Use the 1.5 X 6 inch pile
Velcro®, mentioned in the Required Tools
section, to cover the hook Velcro® on the
bag side of the pouch so it will not snag the
lines. S-fold the remainder of the suspen-
sion line into the pouch leaving about
twelve inches from the bag to the links, then
remove the pile Velcro® strips and mate the
bag’s Velcro® securely, being careful not to
capture any lines.
B
AG
P
LACEMENT
30. Spread the rapid links and reserve risers
evenly across the bottom of the container so
as not to create a lump in the wearer’s back.
31. Place the bag into the container with the
line pouch facing down against the pack
tray.
32. Route the pull up cord up through the
grommet in the free bag.
31. S-fold the bridle up and down in the cen-
ter of the bag between the grommet and the
top of the ears approximately five feet from
the pilot chute. Bridle should exit towards
either bottom corner of reserve container.
22
Quasar II Owners Manual Rev.C 11/2000
Strong Enterprises
