M
AIN
P
ACKING
I
NSTRUCTIONS
Due to the wide variety of canopies currently available on the sport market we have elected
not to cover main canopy packing. For this, you should follow the packing instructions provided by
the manufacturer of the particular canopy you are going to use.
A
TTACHING THE
R
ISERS
1. Attach your canopy to the main risers using the rapid links supplied by its manufacturer.
2. Tighten the links securely.
3. Route the control lines down through the rear slider grommets and their corresponding guide rings
on the main risers.
4. Attach the toggles by passing the loop at the end of the control line up through the grommet, and
then around the end of the toggle. Refer to page 15, step 5.
P
ROPER
3-R
ING
A
SSEMBLY
Inspecting the 3-Ring release. Riser releases should
be inspected prior to every jump. They should be disas-
sembled and cleaned at the beginning of every jump day.
but at least once a month. It should be done more often in
humid, muddy or freezing conditions or after dragging or
water landing. Any mud or dirt must be removed. Use soap
and water and then dry throughly. Any rusted parts must be
replaced.
26
Quasar II Owners Manual Rev.C 11/2000
Strong Enterprises
