29
Quasar II Owners Manual Rev.C 11/2000
Strong Enterprises
5. Stand the rig up vertically and close the riser cov-
ers by folding their plastic tongues into the riser cover
pockets located on the inside of the yoke.
6. Lay the rig flat once again and close the left side
flap next, followed by the right side flap and secure
them with the bridle’s curved ripcord pin.
Safety Tip! Pin should point up, so that shifting
prior to the jump will be to keep the pin secure.
7. Tuck the bridle under the right side flap into the
bridle flap of the container and then close the pin
protector flap by folding it up over the side flaps and
inserting it into the slot in the center flap.
