9. Standing near the rig, reach down and
pick up the canopy's lines near the connec-
tor links. Use your fingers to separate the
front riser lines, the rear riser lines, and the
control lines.
10. Walk toward the canopy pushing the
slider ahead of you as you go. Continue
until the slider is completely seated against
its stops and cannot move any further.
Ensure that the lines are tensioned evenly
and that all are taut.
11. Flake out all seven cells of the nose and
place them between your knees.
12. Reach down into the center of the
canopy and pleat all excess material out-
ward from between each set of line attach-
ment points. Clear out the stabilizers as
well.
13. Flake the tail neatly with all line tabs to
the inside and resting on top of the other
suspension lines.
17
Quasar II Owners Manual Rev.C 11/2000
Strong Enterprises
