Maintenance Chart
43--041
Page 3 of 3
8 — 12
WK43_041_0802GB
"
Fill new oil into the oil filler.
Refer also to chapter: ”General Technical Description” -- section:
”Technical data” for more information on fluid capacities.
Caution
The capacities are only approximate values. These may vary
according to the design and depend on the quantity of oil remaining.
The upper mark on the oil dipstick is always decisive.
"
Check the compressor oil level.
Maintenance chart:
Checking the compressor oil level
Note
Only fill the compressor to the ”Maximum” mark on the oil dipstick.
"
Screw the oil filler firmly back in place.
The following checks are necessary after you have changed the
compressor oil:
"
Switch the machine on. Refer also to chapter:
”Starting up” -- section: ”Switching on the machine”.
"
Leave the machine to run for approximately 2 minutes while
checking for leaks.
"
Switch off the machine. Refer also to chapter:
”Starting up” -- section: ”Shutting down the machine after
starting up”.
"
Check the compressor oil level.
Maintenance chart:
Checking the compressor oil level
"
Top up the compressor oil if necessary.
"
Seal up any leaks that occur.
Leakage check