ARB Twin Bracket Installation Instructions & Owner'S Manual Download

Page: 1 / 6

REV A 04/19/2016

Page 1

Installation Instructions

Please read all instructions before proceeding with installation.

ARB COMPRESSOR MOUNTING KIT

Warranty Information: This item is sold without warranty expressed or implied. The user assumes the risk of the product’s ability to

protect the user from injury or death. The effectiveness and longevity of this product are in direct relation to the manner in which it is

installed, used and maintained. The user assumes all risk. The entire risk with the performance of this product is with the purchaser.

Working on you vehicle can be a dangerous activity, and if you are unsure of what you are doing, please leave mechanical or safety

critical work to a skilled mechanic. We take no responsibility for the incorrect use or installation of this product.

Summary of Contents for Twin Bracket

Page 3: ... 04 19 2016 Page 3 Pieces Parts Item Part Number Description Qty 1 Bolt 1 2 Bolt 1 3 Tapered Bolt 1 4 Nut 1 5 Nut 1 6 Rev Nut 1 7 Washer 2 8 Star Washer 1 9 Bracket 1 10 Angle Bracket 1 1 2 3 10 9 8 7 6 5 4 ...

Page 4: ...red bolt location should look like picture when attached with bolt and washer Use 9 64 Allen Wrench to tighten the bolt 2 Install the ARB Twin Compressor to the bracket 3 Unplug and remove the horn It is recommended that you mount the horn on the bracket at this point but it can be done later as well ...

Page 5: ...osest to the passenger side using a 13mm socket and short extension DO NOT REMOVE 6 Using the 17 32 drill bit drill in the 2nd hole to widen it WEAR EYE PROTECTION Make sure there are no wires under the hole that you could possibly drill into and use a sharp drill bit a Deburr file the hole and put some touch up paint in it to prevent rusting ...