1
MA_VEB100-7_A4_181015_en
Mechanic's instructions
STROBEL Class VEB100-7
Contents
Inhaltsverzeichnis
1
General notes on safety ............................................................................................ 5
2
General ..................................................................................................................... 7
2.1
Operating instructions ..................................................................................... 7
2.2
Class identification, serial number and orientation of the machine................. 7
2.3
Range of applications ..................................................................................... 7
2.4
Technical data ................................................................................................ 8
2.5
Setting instructions in brief ............................................................................. 9
3
Hints for repair and settings .................................................................................... 10
3.1
Mounting the needle plate ............................................................................ 10
3.1.1
Removing the needle plate (Fig. 1) .................................................. 11
3.1.2
Remounting the needle plate ........................................................... 11
3.1.3
Setting the needle plate (Fig. 2) ....................................................... 11
3.2
Needle lever ................................................................................................. 12
3.2.1
Mounting .......................................................................................... 12
3.2.2
Setting the needle stroke (Fig. 3 and Fig. 4) .................................... 13
3.3
Loop stroke ................................................................................................... 14
3.3.1
Setting the loop stroke ..................................................................... 14
3.4
Looper .......................................................................................................... 15
3.4.1
Removing and remounting the looper (Fig. 4) .................................. 15
3.4.2
Removing and remounting the looper shaft ..................................... 15
3.4.3
Looper deflection (Fig. 6) ................................................................. 15
3.4.4
Setting the looper (Fig. 4, Fig. 5 and Fig. 7) ..................................... 16
3.5
Feed dog (top feed) ...................................................................................... 17
3.5.1
Setting the feed dog (Fig. 8) ............................................................. 17
3.6
Feed plates ................................................................................................... 18
3.6.1
Setting the feed plate ....................................................................... 18
3.7
Plunger ......................................................................................................... 19
3.7.1
Replacing the plunger shaft (Fig. 9) ................................................. 19
3.7.2
Adjusting the plunger (Fig. 10) ......................................................... 20
3.7.3
Adjusting the material support arm .................................................. 21
3.8
Sewing drive ................................................................................................. 21
