20
MA_VEB100-7_A4_181015_en
3.7.2
Remove the clamping screw on lever (4)
Adjusting the plunger (Fig. 10)
For blind stitches, the adjustment must be made according to Fig. 10a for thick
materials and Fig. 10b for thin materials.
The plunger is situated in the centre of the needle plate opening and is usually
offset by 1 mm to the left of the needle shaft’s centre. Just before the needle
stitch is inserted, it must be at a standstill when the tip of the needle is approx.
2.5 mm away (Fig. 11).
Fig. 10
a
b
Fig. 11
