31
MA_VEB100-7_A4_181015_en
5.3
Setting the knifes
C A U T I O N !
Danger of injury!
When working on the cutting system, switch off the power
to the complete machine. Otherwise there is a danger of
fingers getting crushed or cut!
Only the setting of the left knife is described here as the right knife is
constructed in mirror fashion.
5.3.1
The cutting angle of the curved knife to the knife can be set at the left threaded
pin (1) / nut (1). (
Setting the cutting angle
Screw in
= wider angle
= more wear
Screw out
= narrower angle
= less wear
Fig. 24
The curved knife needs to be removed for this setting.
Screw out screw (1) and remove contact plate (2), spring (3) and curved knife
(4). (Fig. 25)
