24
MA_VEB100-7_A4_181015_en
4.2
Loosen the screws so that the two panels (1) and (2) can be removed.
Disassembly of the cover (Fig. 16)
Fig. 16
4.3
The transport or the speed of the pressing unit is controlled automatically by the
deflector roll (
Adjusting the feed dog
Fig. 13 (3)).
After the needle plate, the loop of the belt has to be routed through underneath
the deflector roll before it is fed into the opening of the pressing unit. If the belt
loop is not routed underneath the deflector roll, the transport cannot be
controlled automatically, which leads to transport problems.
