Strobel VEB 200-2, Mechanic'S Instructions

Page: 9 / 54

5
MA_VEB200-2_A3_210511_en.doc
2 General
NOTICE: From version 3 onwards, the machine no longer needs to be lubricated.
2.1 Operating instructions
Any person involved in the installation, operation, maintenance and repair of the
machine must have read and understood the operating instructions and mainly the
safety instructions before starting the machine.
2.2 Class description, serial number and initial basis for description
For side-referenced descriptions, the operating side of the machine is the starting
base.
The class identification (type) as well as serial and model number (after the dash) is
located on the right hand side of the housing.
2.3 Range of application and intended use
Class VEB200-2 is suitable for bluff edging thin fabrics up to approx. 400 grammes.
The Kl.VEB200-2 has a spring-loaded plunger on the left and right. It is also delivered
with a 9.5 mm stitch plate. Both cloth retainers are spring-loaded here and combined
with a knurled screw which limits the cloth retainer lift-off upwards.
The range of applications of the different machines can be extended by exchanging
the variable sewing tools, i.e. those other fabric qualities than the above mentioned
ones can be sewn as well.