Strobel VEB 200-2, Mechanic'S Instructions

Page: 33 / 54

29
MA_VEB200-2_A3_210511_en.doc
Machine with or without thread trimmer:
Reference position:
Turn hand wheel in the direction of the machine until the tip of the needle lines up
with the right (inner) edge of the needle glide washers in the stitch-in direction.
For that the right plunger needs to be up (Fig. 17).
Fig. 17
Information on programming of the positions on the motor can be found in the
accompanying sewing drive instructions.
Needle position:
Turn hand wheel in the direction of the machine until the hook of the thread blade
securely catches the thread loop above the looper without touching it. (Fig. 18).
When using a motor with integrated position transmitter, appropriate ratio (2:1) and
toothed-belt drive, it needs to be observed that the left plunger is at top.
Please check by manual activation of the thread trimmer afterwards.
On machines without thread trimmer this position is approximately the left reversal
point of the needle.
Please note: This position is position 2 on motor!
Fig. 18