Strobel VEB 200-2, Mechanic'S Instructions

Page: 36 / 54

32
MA_VEB200-2_A3_210511_en.doc
3.12.3 Setting positions 1 and 2
After entering the code number “1907” and button “E” for the technician level:
- Select parameter F-171. Display shows: .1.7.1.
- Press “E” button. Sr2_
-
Press “>>” button. P1E
Turn the handwheel in the machine's direction of rotation
until “P1E” changes to the position value in the display. Then
set the handwheel or needle to the position 1 of the sewing
machine (Refer to chapter “3.10 Cutting position”).
Remember or record the position value.
-
Press “E” button. P2E
Turn the handwheel in the machine's direction of rotation
until “P2E” changes to the position value in the display. Then
set the handwheel or needle to the position 2 of the sewing
machine (Refer to chapter “3.10 Cutting position”).
Remember or record the position value.
-
Press “E” button. P1A
Turn the handwheel in the machine's direction of rotation
until “P1A” changes to the position value in the display. Then
turn the handwheel or needle until the position value “P1E +
25” is displayed.
- Press “E” button. Display shows: P2A
Turn the handwheel in the machine's direction of rotation
until “P2A” changes to the position value in the display. Then
turn the handwheel or needle until the position value “P2E +
25” is displayed.
- Press “P” button. .1.7.1.
- Press “P” button.